PRO HEAVY DUTY INFLATABLE TENT
(Military Tent or Emergency/Humanitarian Relief Tent)
The strength and stability under load of NIXUS PRO tents is due to the structure being made of heavy duty, seamless pneumatic tubes of 6’’ diameter with a working pressure of between 4 and 8 bar. The use of high pressure tubes makes the tent structure rigid and stable, as well as resistant to strong wind and snow loads. The PRO-ELR (Extended Load Resistance) version is available for missions with a snow load requirement over 50kg/m2 in a combination with wind load of 33m/s.
Another advantage of the use of high pressure tubes is their resistance to ambient temperature fluctuations so there is no necessity for permanent pressure control or air refill. The minimum (collapse) pressure of the tent is just 1.5 bar so with such a wide working pressure range PRO tents are the first choice for use in the harshest conditions, from extreme cold areas to desert and tropical heats.
The durability of the design extends to all components with the canopy of the PRO tent being made of opaque 1000D polyester fabric with both sides PVC coated. This makes the material waterproof, fire retardant and suitable for very low temperatures of down to -50°C, with an optional IR membrane.
The NIXUS PRO is made in a bicolor mode with a grey color inside and olive green or sand color outside. Each tent is packed in a strong PVC waterproof bag with a repair kit included.
Click on the photo on the right to see the rapid set-up of the NIXUS PRO military tent or emergency relief tent
Extreme weather resistance, suitable for very cold, desert and tropical conditions
Huge load bearing capability for high wind and snow loads
High pressure (4 – 6 bar) 6″ seamless pneumatic tubes provide a rigid structure
Modular design enables multiple configurations of units to make larger buildings
Designed for fast deployment with minimum labour
RANGE OF NIXUS PRO TENTS
NIXUS PRO SI
The PRO SI uses horizontal high pressure inflatable beams as tensioning elements. These can also be used to space the sun shade cover away from the tent surface.
NIXUS PRO ST
The PRO ST uses horizontal aluminium struts in place of inflatable beams as tensioning elements. These are installed from inside the tent once inflated.
NIXUS PRO SH
The PRO SH uses a combination of high pressure inflatable beams and aluminium struts as horizontal tensioning elements.
NIXUS PRO X
The PRO X is a central interconnecting module and can be used with all NIXUS PRO models.
NIXUS PRO – SIZES
PRO Model | Width m | Width Ft | Length m | Length Ft | Height m | Height Ft |
---|---|---|---|---|---|---|
NX-PRO-51-40 | 5.1 m | 16′ 9″ | 4.0 m | 13′ 5″ | 2.8 m | 9′ 3″ |
NX-PRO-51-60 | 5.1 m | 16′ 9″ | 6.0 m | 19′ 7″ | 2.8 m | 9′ 3″ |
NX-PRO-51-80 | 5.1 m | 16′ 9″ | 8.0 m | 26′ 2″ | 2.8 m | 9′ 3″ |
NX-PRO-51-100 | 5.1 m | 16′ 9″ | 9.9 m | 32′ 6″ | 2.8 m | 9′ 3″ |
NX-PRO-61-60 | 6.1 m | 20′ 0″ | 6.0 m | 19′ 7″ | 3.3 m | 10′ 9″ |
NX-PRO-61-80 | 6.1 m | 20′ 0″ | 8.0 m | 26′ 2″ | 3.3 m | 10′ 9″ |
NX-PRO-61-100 | 6.1 m | 20′ 0″ | 9.9 m | 32′ 6″ | 3.3 m | 10′ 9″ |
NX-PRO-61-119 | 6.1 m | 20′ 0″ | 11.9 m | 38′ 8″ | 3.3 m | 10′ 9″ |
NX-PRO-X-51-51 | 5.1 m | 16′ 9″ | 5.1 m | 16′ 9″ | 3.6 m | 11′ 7″ |
NX-PRO-X-61-61 | 6.1 m | 20′ 0″ | 6.1 m | 20′ 0″ | 4.3 m | 14′ 1″ |